STANLEY Thermo mug NEVERLEAK 250 ml Classic series, maple brown

New non-traditional concept of the STANLEY thermo mug. It is already clear from the title what the priority was. It will NOT flow when it does not. Just NEVER. Classic STANLEY Modern, but at the same time very traditional maple brown 250 m

With the STANLEY® NEVERLEAK thermo mug, it is already clear from a simple English translation of the emphasis with which it was developed. Its name suggests that it will NEVER flow when it doesn't. Its name is a patent of the STANLEY® brand for this new and unique thermo mug closing system. It just can't happen, thanks to the rotating control technology, that somewhere deep in the backpack the cap is released and the contents flow out. It is almost ultimate in what it was created for. Keep the drink inside until you want your drink, whether cold or hot. However, the unique technology does not prevent the lid from being easily and simply disassembled, in case it is cleaned and washed, even in a dishwasher. In addition, it is very light, compact and fits into most car holders.
Key properties:

stainless steel, food grade and fully recyclable steel 18/8
double wall with vacuum insulation
100% sealing with leakage guarantee
3 lid positions
closed
openly
cleaning
The lid is very thin and takes up very little of the total size of the mug
cap without BPA
weight 230 g
dishwasher safe
diameter 68 mm
height 154 mm
stamina
hot 3 hours
cold 4 hours
ice floe 22 hours
the smaller size (250 ml) fits under most home coffee makers. There is no need to pour from cup to cup and lose temperature.
compact size
classic but at the same time modern colors
STANLEY warranty 25 years without compromising on functionality
Disassembling the lid for washing.

The first attempt may be a bit daunting, but after 2-3 three cleanings you will find that there is nothing wrong with it and that everything fits together perfectly.

The lid has three positions. For orientation, top view, the drinking hole is at the bottom, ie as when drinking.

Closed (position to the far left of the drinking hole, top view)
Open for drinking (middle position - top view)
Service - washing (position on the far right of the drinking hole - top view)
In the service position, the lid can be disassembled into "primary factors" for easy maintenance and cleaning. The lid has 3 components: A outer swivel cap + B screw part with a thread for the cup + C inner part with a "handle"

Turn the outer rotary cap A to the service position, ie when viewed from above counterclockwise
turn the entire lid with the inner part towards you
turn the inner part C by the "loop" counterclockwise until you hear a gentle click
lightly remove the inner part C
separate the other two parts (A + B) outer A and the screwing part B by a simple light pull
Reassembly is similar
insert the outer and screw parts so that the cover part is on the far right and the outer part rests on the screw part. It can't be otherwise
turn the inner part towards you and put the inner part in place so that the larger rubber seal fits in place of the drinking hole
turn the tab clockwise with a gentle motion until you hear a gentle click again
move the outer part from the service position (far right) to the desired position - closed (far left) or for drinking (middle)