ORION PUREhome Retro siphon bottle, plastic/stainless steel

Safety instructions

This siphon operates under pressure. Failure to follow the safety instructions or improper handling of the products. If and care cannot be taken, this may result in improper system operation, personal injury and/or property damage.

• The iSi device is approved for use in accordance with the device data and for the purposes stated in the instructions for use!

• To avoid operating errors, please read the operating instructions carefully and keep them!

• Never force the siphon open. If it cannot be opened, read the instructions in the user manual.

• Keep the iSi out of the reach of children!

• Only operate the device when it is filled to the maximum capacity!

• Never store or use the iSi device outside the minimum and maximum operating temperatures (min. 1 °C, max.: 50 °C)!

• Always only combine heads, bottles, sealing heads and capsule holders of the same type of device!

• When replacing parts, follow the instructions for use.

• Do not combine products from other companies with iSi parts!

• Be careful not to screw the device heads and the cartridge holder at an angle!

• For safety reasons, never pressurize the appliance with cartridges from another manufacturer. Only use original iSi cartridges!

• Do not lean over the device when screwing in the cartridges!

• The product must never be dropped, whether it is under pressure or not. The device is a pressure vessel. If it falls or is damaged (such as cracks or deformation), it becomes a source of danger and must no longer be put into operation! Have the device checked by an iSi service center!

• Never attempt to open a siphon under pressure. If the siphon is blocked, refer to the instructions in the user manual.

• Never use the lever (if available) as a carrying handle!

• Before each use, make sure that the device is not clogged. To prevent blockages, the device must be cleaned properly.

• Do not disassemble any parts beyond the scope of the instructions.

• Do not make any modifications to the iSi. This will void the warranty and result in exclusion of liability.

• Do not use more cartridges than specified, or never overfill the device! Also ensure that the maximum specified operating pressure is not exceeded!

• If the pressure cannot be relieved, please contact iSi or your service center!

• Before cleaning, it is necessary to check the material compatibility of the cleaning and disinfection solution used!

• No cryogenic applications, e.g. with liquid nitrogen, are permitted!

• Use only liquid additives. Do not use additives that are excluded by safety restrictions.

WARNING iSi SODAMAKER CLASSIC: Manual cleaning only with damp water and a commercially available hand dishwashing detergent! The iSi is not suitable for washing in the dishwasher! Unapproved washing in the dishwasher can result in damage to the bottle and the soda maker head - such action can adversely affect the safety of the soda maker!